APPLICATIONS
For repair of cast iron housing blocks, making and all application of VC-50 where higher tensile and harder deposit is required.
CHARACTERISTIC
A counterpart of VC-50 with high hardness due to additional of Mn.
NOTES ON USAGE
1.) Clean base metal before welding.
2.) If there is a possibility that cracking spreads, make the stopholes at both ends of repairing part.
3.) Keep bead length less than 50mm to disperse welding heat. Adopt back step, stepping stone or symmetry method by turns.
4.) Hot peen in every pass.
5.) It is not necessary preheating and postheating in general but satisfactory results can be obtained by preheating at 100-200ºC in accordance with kind, shape and size of base metal.
TYPICAL ANALYSIS OF ALL WELD DEPOSIT:
C |
Si |
Mn |
Fe |
Ni |
|
|
|
|
0.85 |
0.60 |
2.5 |
0.80 |
Bal |
|
|
|
|
TYPICAL MECHANICAL PROPERTIES OF ALL WELD DEPOSIT:
Tensile Strength
N/mm2 (Ksi) |
Elongation
(%) |
Hardness
BHN |
510 (74) |
20 |
220 |
RECCOMENDED CURRENTS: Ampere (AC/DC+)
Size |
Dia |
3.2 |
4.0 |
5.0 |
(mm) |
Length |
350 |
350 |
350 |
Current Range |
80-120 |
120-150 |
140-190 |
WELDING POSITIONS:
FLAT, FILLET, VERTICAL UP, HORIZONTAL, OVERHEAD
EXPORT Packing: 5Kg plastic container, then 4 5kg containers in master carton box
LOCAL Packing: 5Kg paper box in shrink wrapped plastic
Other special packaging can be accommodated as per request. |
