Appearance:
Both White and Red coating are available.
Applications:
Welding of all types of mild (low carbon) steel
Steel structures –trusses, portal frames, tube transmission
Sheet and plate metal structures and containers –plating, storage tanks, hoppers, silos, bins
Fillet jointing of pipes for water, gas and fluid transmission
Site jointing of H/sheet/pipe piles
Light steel frames = grills, ornamental and gate works, furniture
General workshop welding and maintenance
Compatible and suitable for welding steels to: ASTM (eg A36), BS EN 10025 (eg S75, S275 JR), API Std. 5L (eg grade A, B, A25, X42, X46) BS 4360 (eg grade 40, 43) JIS G3106 (eg SS41, SM41)
Characteristics:
Very initial arc strike (ignition) and “cold” re-striking (re-ignition) properties, for easy tack welding or point weld
Ultra smooth quite and stable arc
Very few smoke or fumes during welding
Self-removing slag –reduces cealning and slag removing time after welding
Beautiful and finel rippled bead for nice finishing and appearance
Outstanding all position welding performance including vertical down
Can use touch type or contact welding giving ease and comfort to welders
EXCLUSIVE FOR PHILIPPINE MARKET ONLY
COMPARABLE TO: WIPWELD 1300
Notes on Usage:
(1) Pay attention not to exceed the range of proper currents. Welding with excessive current not only lowers X-ray soundness, but also causes increase of spatter, under-cut and insufficient slag covering.
(2) Dry the electrodes at 70-100 degrees C for 30-60 minutes before use. Excessive moisture absorption lowers usability and may result in some porosities.
(3) Excessive drying before use causes less in penetration and overheating of the electrode.
Typical Chemical Composition of Weld Metal (%):
C |
Mn |
Si |
P |
S |
0.08 |
0.38 |
0.33 |
0.016 |
0.010 |
Typical Mechanical Properties of Weld Metal:
Yield Point
N/mm2 (Kgf/mm2) |
Tensile Strength
N/mm2 (Ksi) |
Elongation
(%) |
Impact Value
Deg C, J (Deg F, Ft-lbs) |
430 (62) |
500 (73) |
27 |
0,85 (32,63) |
Size and Recommended Current Range (AC or DC +/-):
Diameter (mm) |
3.2 |
4.0 |
5.0 |
Length (mm) |
350 |
350 |
350 |
Ampere |
Flat |
100-130 |
130-180 |
170-230 |
V & OH |
90-120 |
120-170 |
160-220 |
Welding Positions:
Flat, Fillet, Vertical Up, Horizontal, Overhead
Approvals:
ABS
Packing:
20 Kg corrugated box, with 4 units of 5 Kg sealed plastic inside.
Special requests on packing are accepted. |
