APPLICATION:
For fabricating new or rebuilding worn ferrous dies used for forming or drawing titanium, low carbon and stainless steel.
TYPICAL ANALYSIS OF ALL WELD DEPOSIT:
Cu |
Al |
Fe |
Si |
Sn |
P |
Others |
|
|
Bal |
14-15 |
3-5 |
10-.0 max |
- |
- |
0.50 max |
|
|
TYPICAL ALL WELD MECHANICAL PROPERTIES:
Yield Point
N/mm2 (Ksi) |
Tensile Strength
N/mm2 (Ksi) |
Elongation
% |
HARDNESS
HB |
475 (69) |
550 (80) |
0 |
300-310 |
RECCOMMENDED CURRENTS: Ampere (DC+)
Size |
Dia |
3.2 |
4.0 |
5.0 |
|
(mm) |
Length |
350 |
350 |
350 |
|
Current
Range |
Flat |
70-110 |
110-150 |
140-180 |
|
|
|
WELDING POSITIONS:
FLAT, FILLET, VERTICAL UP, HORIZONTAL, OVERHEAD
EXPORT Packing: 5Kg plastic container, then 4 5kg containers in master carton box
LOCAL Packing: 5Kg paper box in shrink wrapped plastic
Other special packaging can be accomodated as per request. |
