APPLICATIONS:
Welding of 50 kg/mm class high tensile weather-proof steel of buildings, brid
SPECIAL FEATURES:
P-7016W is a low hydrogen type electrode for all position welding of 50kg/mm2 class high tensile weather proof steel.
- Excellent mechanical properties.
- Good notch toughness in low temperature.
- X-ray performance and mechanical usability are good.
Note on usage
- Dry the electrodes at 300-350ºC for one hour before use.
- Adopt back step method or strike the arc on a small steel plate prepared for this purpose to prevent blowholes at the arc starting.
- As excessive heat-input deteriorates impact values, weld with proper heat-input selected according to the impact values required.
TYPICAL CHEMICAL COMPOSITION OF ALL-WELD METAL DEPOSITS (%)
C |
Si |
Mn |
P |
S |
Ni |
Cu |
0.06 |
0.54 |
0.86 |
0.011 |
0.004 |
0.6 |
0.27 |
TYPICAL MECHANICAL PROPERTIES OF WELD METAL
Yield Point
N/mm2 (kgf/mm2) |
Tensile Strength
N/mm2 (kgf/mm2) |
Elongation
% |
IV, J (kgf.m) |
440 (64) |
540 (78) |
32 |
0,170 (32,125) |
SIZES & RECOMMENDED CURRENTRANGE: AC or DC (+)
DIAMETER (mm) |
2.6 |
3.2 |
4.0 |
5.0 |
LENGTH (mm) |
350 |
350 |
400 |
400 |
CURRENT
( A) |
F |
50-85 |
90-130 |
130-180 |
180-240 |
V, OH |
50-80 |
80-115 |
110-160 |
130-180 |
|
